Dual-Mode Headband Air Purifying Respirator Filter - Easy Adjustment & Anti-Fog Design

Key Features

• High-grade silicon material improves comfort and durability
• Dual-mode headband for easy adjustment, divided into standard mode and pull-down mode
• The exhalation valve valve sleeve guides the exhaled air and water vapor down, thereby reducing the generation of fog.​​​​​ ​​​​​

Dust-Air Filter Half Mask for Electroplating  

Electroplating shops are fierce on lungs: acid mists, metallic dust and solvent vapours swirl above every bath. Our half-mask pairs a rugged face-piece with high-flow ABEK-P3 cartridges to give operators laboratory-grade air without the bulk of a full-face unit.

Key protection: P3 media traps 99.97 % of chrome, nickel and copper dust down to 0.3 µm-blocking the metallic mist that US-NIOSH found at 7,400 µg m⁻³ in tank areas. Activated carbon layer chemisorbs HCl, SO₂ and organic solvents (toluene, xylene) released during pickling or solvent degrease, cutting exposure well below OSHA limits. 

Built for shift-long comfort: medical-grade silicone face-seal adapts instantly, maintaining an airtight fit through talking and head movement; inhalation valve delivers 180 L min⁻¹ flow with <45 Pa resistance, eliminating the "sucking-through-a-straw" fatigue common after eight-hour chrome runs. Low-profile housing fits under welding hoods or face shields, so painters, polishers and inspectors keep the same respirator across tasks.

Durability that pays: cartridges last 40 hours under typical plating loads-costing

Result: chrome-platers, zinc-dippers and acid-line operators breathe cleaner, work cooler and stay compliant-turning the plating shop from a health hazard into a controlled, productive workplace.

Component Assembly

Tips Before Wearing

●  Examine the Mask: Inspect for any visible damage, such as cracks or tears, and     ensure the sealing edges are in perfect condition.

●  Select the Right Cartridge: Choose a cartridge suitable for your specific work environment, whether for dust, chemicals, or gases, and confirm it is securely attached.

●  Check Expiry Date: Verify that the cartridge is within its expiration date to ensure optimal filtration performance.

●  Perform a Seal Check: After putting on the mask, cover the cartridge openings     and inhale gently to confirm there are no air leaks, ensuring a proper fit.

●  Adjust the Straps: Tighten the head straps evenly to achieve a snug yet                         comfortable fit, avoiding over-tightening that may cause discomfort.

By following these steps, you can maximize the respirator's effectiveness and          ensure your safety in hazardous environments.